RESEARCH INTERESTS

Energy harvesting, Microsystems, Autonomous Sensors, ZnO technology, Carbon Quantum Dots, Micro- and Nanofabrication

ABOUT/BIOGRAPHY

Dr Christos Tsamis received his Physics diploma from the National & Kapodistrian University of Athens in 1989 and his PhD degree from Aristotle University of Thessaloniki in 1996. Since 1996 he joined the Institute of Microelectronics (now Inst. of Nanoscience & Nanotechnology) at the National Center for Scientific Research “Demokritos” where he is currently “Director of Research”. He is leading the group on “Energy Harvesting and Autonomous Sensors”. His research interests focus on Micro- and Nanofabrication technologies for Microsystems for devices and sensors, Nanostructured materials and devices for Energy harvesting, Chemical Sensors, flexible electronics and Thermal processes for micro- and nanodevices. He is/was Scientific Responsible and/or Coordinator for several National and EU projects in the above topics, attracting a total funding of 1.9 MEuros, and has participated in several others as a key researcher. He acts as reviewer for international journals and Conferences. He was General Conference Chairman for EUROSENSORS XXV that took take place in Athens (4-7 September 2011), as well as co-Chairman or Member of the Organizing Committee for International and National Conferences.  He acts as a evaluator for the EU (H2020), the General Secretariat for Research and Technology, the Serbian Ministry of Science and Technological Development, the Polish National Science Centre. He has supervised seven PhDs and several MSc theses. He is the author or co-author of over 200 publications in peer-reviewed International Journals, Conference Proceedings, and contributions in International Conferences.  He has edited 3 Conference Proceedings Volumes. During 2006-2013 he was Head of Education at NCSR “Demokritos” and during 2012-2013 he was also heading the Public Relations and Press Office at NCSR “Demokritos”.

https://orcid.org/0000-0003-0549-2780

READ MORE

PUBLICATIONS

Barmpakos, D., Tsamis, C. and Kaltsas, G., Multi-parameter paper sensor fabricated by inkjet-printed silver nanoparticle ink and PEDOT:PSS Microelectronic Engineering, Volume 225, Article Number: 111266, 2020 [doi]

Segkos, A., Sakellis, I., Boukos, N., Drivas, C., Kennou, S., Kordatos, K. and Tsamis, C., Patterned carbon dot-based thin films for solid-state devices Nanoscale, Volume 12, Pages: 10254-10264, 2020 [doi]

Siskos, S., Gogolou, V., Tsamis, C., Kerasidou, A., Doumenis, G., Tsiapali, K., Katsikas, S. and Sakellariou, A., Design of a flexible multi-source energy harvesting system for autonomously powered IoT : The PERPS project Pages: 133-134, Article Number: 8862078, 2019 [doi]

Liu, X., Wu, Z., Zhang, Y. and Tsamis, C., Low temperature Zn-doped TiO 2 as electron transport layer for 19% efficient planar perovskite solar cells Applied Surface Science, Volume 471, Pages: 28-35, 2019 [doi]

Carbone, M.G.P., Tsoukleri, G., Manikas, A.C., Makarona, E., Tsamis, C. and Galiotis, C., Production and mechanical characterization of graphene micro-ribbons Journal of Composites Science, Volume 3, Article Number: 42, 2019 [doi]

Barmpakos, D., Segkos, A., Tsamis, C. and Kaltsas, G., Enhancement Of PEDOT:PSS Seebek Coefficient Using Carbon-Quantum-Dot-Based Nanocomposite Materials: Application To Inkjet Printing On Flexible Substrate Pages: 2515-2518, Article Number: 8808805, 2019 [doi]

Botsi, S., Tsamis, C., Chatzichristidi, M., Papageorgiou, G. and Makarona, E., Facile and cost-efficient development of PMMA-based nanocomposites with custom-made hydrothermally-synthesized ZnO nanofillers Nano-Structures and Nano-Objects, Volume 17, Pages: 7-20, 2019 [doi]

Kerasidou, A. P., Bardakas, A., Botzakaki, M., Georga, S. N., Krontiras, C. A., Mergia, K., Psycharis, V. P. and Tsamis, C., Growth of ZnO nanowires on seeding layers deposited by ALD: The influence of process parameters MICROELECTRONIC ENGINEERING, Volume 217, 2019 [doi]

Botzakaki, M.A., Skoulatakis, G., Xanthopoulos, N., Gianneta, V., Travlos, A., Kennou, S., Ladas, S., Tsamis, C., Makarona, E., Georga, S.N. and Krontiras, C.A., Influence of the atomic layer deposition temperature on the structural and electrical properties of Al/Al2O3/p-Ge MOS structures Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Volume 36, Article Number: 01A120, 2018 [doi]

Dubourg, G., Segkos, A., Katona, J., Radović, M., Savić, S., Niarchos, G., Tsamis, C. and Crnojević-Bengin, V., Fabrication and characterization of flexible and miniaturized humidity sensors using screen-printed TiO2 nanoparticles as sensitive layer Sensors (Switzerland), Volume 17, Article Number: 1854, 2017 [doi]

Barmpakos, D., Segkos, A., Tsamis, C. and Kaltsas, G., A disposable flexible humidity sensor directly printed on paper for medical applications Volume 931, Article Number: 012003, 2017 [doi]

Niarchos, G., Dubourg, G., Afroudakis, G., Georgopoulos, M., Tsouti, V., Makarona, E., Crnojevic-Bengin, V. and Tsamis, C., Humidity sensing properties of paper substrates and their passivation with ZnO nanoparticles for sensor applications Sensors (Switzerland), Volume 17, Article Number: 516, 2017 [doi]

VIEW ALL
Skip to content